Rainwater systems: Difference between revisions

Jump to navigation Jump to search
m
(→‎Rainwater collection methods: Better image of rain barrels)
Line 36: Line 36:
[[File:Rain barrels.jpg|thumb|An example of two rain barrels connected with an overflow pipe. The first barrel is fed via downpipe by rainwater collected from the roof. When it fills up, water travels over into the second barrel. Taps at the base allow for direct extraction of water | left | 240px]]
[[File:Rain barrels.jpg|thumb|An example of two rain barrels connected with an overflow pipe. The first barrel is fed via downpipe by rainwater collected from the roof. When it fills up, water travels over into the second barrel. Taps at the base allow for direct extraction of water | left | 240px]]


This method is the fastest to get setup with and is popular as a readily-available backup solution. It involves installing a barrel at a gutter downspout to collect rainwater. The actual barrel may be a recycled barrel or a commercially available rain barrel. Some commercially available barrels are made of food grade plastics. UV resistant plastics can be a good idea, especially if the barrel cannot be installed in a location away from direct sunlight. It is important that the entrance hole to the barrel has a mesh or other filter to stop leaves and insects getting into the water.  
This method is the fastest to get setup with and is popular as a readily-available backup solution. It involves installing a barrel at a gutter downspout to collect rainwater. The actual barrel may be a recycled barrel or a commercially available rain barrel. Some commercially available barrels are made of food grade plastics. UV resistant plastics can be a good idea, especially if the barrel cannot be installed in a location away from direct sunlight. It is important that the entrance hole to the barrel has a mesh or other filter to stop leaves and insects getting into the water. Wire or nylon mesh can be used, or even an old sieve.


Pros:
Pros:

Navigation menu